.. _load_cases:

tab "Load_Cases"
=================

This tab is mandatory.

:term:`Load cases <load case>` define the different 
:term:`opening holes <opening hole>` to simulate. Besides the opening
holes themselves, load cases also define the opening hole's discharge
coefficient and the differential pressure.

Parameters
-----------

.. tabularcolumns:: |p{0.2\linewidth}|p{0.10\linewidth}|p{0.2\linewidth}|p{0.2\linewidth}|

.. _load_cases_param_table:

.. table:: Load Cases parameters
   :class: longtable

   +----------------+-------------------------------+---------------+--------------+
   |                | description                   | default       | units        |
   +================+===============================+===============+==============+
   | id             | Load Case ID                  | **mandatory** | no units     |
   +----------------+-------------------------------+---------------+--------------+
   | vol_i          | ID of Exploded Volume(s)      | **mandatory** | no units     |
   +----------------+-------------------------------+---------------+--------------+
   | opening_hole   | Raw opening area              | **mandatory** | [m^2 | in^2] |
   +----------------+-------------------------------+---------------+--------------+
   | cp             | Discharge coefficient         | **mandatory** | no units     |
   +----------------+-------------------------------+---------------+--------------+
   | altitude       | Flying altitude               | *blank*       | [m | in]     |
   +----------------+-------------------------------+---------------+--------------+
   | pressure_coeff | Aircraft pressure coefficient | 0             | no units     |
   +----------------+-------------------------------+---------------+--------------+
   | mach_number    | Aircraft mach number          | 0             | no units     |
   +----------------+-------------------------------+---------------+--------------+
   | p_atm          | Atmosphere pressure value     | *blank*       | [bar | psi]  |
   +----------------+-------------------------------+---------------+--------------+
   | t_cabin        | Cabin initial temperature     | 296           | [K]          |
   +----------------+-------------------------------+---------------+--------------+
   | p_cabin        | Cabin initial pressure        | **mandatory** | [bar | psi]  |
   +----------------+-------------------------------+---------------+--------------+
   | label          | Load Case label               | **mandatory** | no units     |
   +----------------+-------------------------------+---------------+--------------+


.. _load_cases_id:
.. include:: parameters/.load_cases_id.rst
.. include:: parameters/load_cases_id.rst

.. _load_cases_vol_i:
.. include:: parameters/.load_cases_vol_i.rst
.. include:: parameters/load_cases_vol_i.rst

.. _load_cases_opening_hole:
.. include:: parameters/.load_cases_opening_hole.rst
.. include:: parameters/load_cases_opening_hole.rst

.. _load_cases_cp:
.. include:: parameters/.load_cases_cp.rst
.. include:: parameters/load_cases_cp.rst

.. _load_cases_altitude:
.. include:: parameters/.load_cases_altitude.rst
.. include:: parameters/load_cases_altitude.rst

.. _load_cases_pressure_coeff:
.. include:: parameters/.load_cases_pressure_coeff.rst
.. include:: parameters/load_cases_pressure_coeff.rst

.. _load_cases_mach_number:
.. include:: parameters/.load_cases_mach_number.rst
.. include:: parameters/load_cases_mach_number.rst

.. _load_cases_p_atm:
.. include:: parameters/.load_cases_p_atm.rst
.. include:: parameters/load_cases_p_atm.rst

.. _load_cases_t_cabin:
.. include:: parameters/.load_cases_t_cabin.rst
.. include:: parameters/load_cases_t_cabin.rst

.. _load_cases_p_cabin:
.. include:: parameters/.load_cases_p_cabin.rst
.. include:: parameters/load_cases_p_cabin.rst

.. _load_cases_label:
.. include:: parameters/.load_cases_label.rst
.. include:: parameters/load_cases_label.rst

.. include:: load_cases_specific.rst